Sharpening
|
Sharpening |
|
|
Sharpening |
H & H Tool & Cutter Service 50 Hudson St. Tiffin, OH 419-447-9052 Back Home page
Sharpening Service
Carbide saws blades ground with multiple grit wheels with synthetic oil cleaned by high speed centrifuge and filters for better than new performance
Tip Replacement $3.00-$3.50, Gullet Replacement $5-$7.50, Repair bent teeth, Steel Relieving, Custom Made Blades.
7" x 24"
$4.75 Standard sharpening = .006 ground off
Diameter, .005 ground off Face. Alt faces vary.
| up to 28 teeth | 40 teeth | 50 teeth | 80 teeth or more | |
| 8" - 16" Diameter Sawblade | $12.00 | $14.00 | $15.00 |
$0.20 / tooth |
| Heavy kerf blade up to 34" | $13.00 | $15.00 | $16.00 | $0.25 / tooth |
Knife Sharpening Steel and carbide knives up to 60" or 5' in length
Steel Planer & Jointer Knives up to 5/32 thickness Ground & honed $.050/inch or $6 minimum per set.
Steel Knives up to 1/2 Thick Start at $1.00 per inch. Heavily nicked knives $1.50 per Inch.
Thicker knives call for Quote.
Router Bits Straight bits $5.00, Profile bits $7.50, Panel Raiser Bit $12.50 - $15.00, Compression Bits up to 1/2" Dia $10.00
Shaper Cutters
End Mills,
Drills,
Taps
Reamers
Counter Sinks